Quality Inspection for Printer Slotter Die-Cutter Folder Gluer Inline - SM-E type double facer – HengChuangLi
Quality Inspection for Printer Slotter Die-Cutter Folder Gluer Inline - SM-E type double facer – HengChuangLi Detail:
Structural features
The surface of the heating plate is grinded, and the width of the hot plate is 600mm. The heating plate is made of container plate, which conforms to the national class I pressure vessel standard, and the pressure vessel certificate and inspection certificate are attached.
The hot plate adopts dense gravity roller structure. The pressure roller adopts pneumatic lifting.
The heat conduction piping of the heating plate is divided into four sections to control the temperature, with temperature display.
The double cylinder S-type tension device is adopted for the upper cotton belt.
The lower belt adopts S-shaped manual deviation correction and tension mechanism, with simple and practical structure, and a set of manual fine-tuning type of lower belt.
The driving roller surface is coated with wear-resistant image glue, which is herringbone structure with medium height to ensure smooth output of paperboard.
The main drive motor is frequency conversion speed regulating motor, with large low-speed torque, wide speed range, reliable use and simple maintenance.
The internal part of the hot plate is a diaphragm isolation structure, which makes the steam flow in S-shape. The separation function of steam and water is obvious, and the utilization rate of steam is improved.
Technical parameters
Temperature requirement: 160-200 ℃
Steam pressure: 0.8-1.3mpa
Air source pressure: 0.6-0.9mpa
Cooling setting length: 4-8M
Number of heating plates: 9-18 pieces
Hydraulic system pressure: 6-8mpa
Roller diameter parameters
The diameter of upper driving cot: ￠ 475mm
The diameter of the lower driving cot: ￠ 350mm
The diameter of front driven belt roller: ￠ 176mm
Diameter of driven roller after setting￠ 176mm
The diameter of pressing roller: ￠ 70mm
The diameter of shaping idler: ￠ 86mm
The diameter of upper belt tensioning roll: ￠ 155mm
The diameter of upper belt deflection adjusting roll: ￠ 124mm
The diameter of lower belt roller: ￠ 130mm
Note: the surface of all rollers is hard chromium plated after grinding.
Product detail pictures:
Related Product Guide:
We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with the good quality at the reasonable price for Quality Inspection for Printer Slotter Die-Cutter Folder Gluer Inline - SM-E type double facer – HengChuangLi , The product will supply to all over the world, such as: Armenia , Panama , Switzerland , We have a good reputation for stable quality products, well received by customers at home and abroad. Our company would be guided by the idea of "Standing in Domestic Markets, Walking into International Markets". We sincerely hope that we could do business with car manufacturers, auto part buyers and the majority of colleagues both at home and abroad. We expect sincere cooperation and common development!
By Muriel
from Kuwait
- 2017.11.01 17:04
This company has a lot of ready-made options to choose and also could custom new program according to our demand, which is very nice to meet our needs.
By Elma
from Berlin
- 2018.12.25 12:43
Products categories
-
China OEM Cardboard Box Packing Machine - 3 pl...
-
High Quality Adsorption Type Single Face Machin...
-
Factory Cheap Hot Carton Box Machine - LJXC-A1...
-
China wholesale Taobao Printing Press - High s...
-
PriceList for Corrugated Cardboard Line - Thre...
-
Leading Manufacturer for Folder Gluer Inline - ...