Hydraulic shaftless paper rack repair, maintenance and trouble shooting
(1) The repair and maintenance of the hydraulic station should be carried out according to the manual of the hydraulic station.
(2) the sliding key surface is an important working face, in addition to often clean, must also have sufficient lubricating oil, before work, should be the drops of oil on the surface of sliding key, let beam light back and forth movement to get sufficient lubrication paper rolls, again after work, if discover the feather surface should be timely add lubrication, poor lubrication to avoid injury parts surface.
(3) the rotary arm and the hydraulic cylinder pin shaft are relatively rotating, and should be lubricated frequently.
(4) lubricating oil should be added regularly to the spindle sleeve.
(5) The paper holder and the nut are supported by rolling bearings, and grease should be added regularly (usually half a year).
(6) the sprocket in the cross arm should be regularly removed after the cover drop oil lubrication.
(7) The tension of the chain clamping the transmission part should be adjusted properly after a period of use.
Post time: Jul-19-2021