Manufactur standard Pre-Fold Folder Gluer - SM-E type double facer – HengChuangLi
Manufactur standard Pre-Fold Folder Gluer - SM-E type double facer – HengChuangLi Detail:
Structural features
The surface of the heating plate is grinded, and the width of the hot plate is 600mm. The heating plate is made of container plate, which conforms to the national class I pressure vessel standard, and the pressure vessel certificate and inspection certificate are attached.
The hot plate adopts dense gravity roller structure. The pressure roller adopts pneumatic lifting.
The heat conduction piping of the heating plate is divided into four sections to control the temperature, with temperature display.
The double cylinder S-type tension device is adopted for the upper cotton belt.
The lower belt adopts S-shaped manual deviation correction and tension mechanism, with simple and practical structure, and a set of manual fine-tuning type of lower belt.
The driving roller surface is coated with wear-resistant image glue, which is herringbone structure with medium height to ensure smooth output of paperboard.
The main drive motor is frequency conversion speed regulating motor, with large low-speed torque, wide speed range, reliable use and simple maintenance.
The internal part of the hot plate is a diaphragm isolation structure, which makes the steam flow in S-shape. The separation function of steam and water is obvious, and the utilization rate of steam is improved.
Technical parameters
Temperature requirement: 160-200 ℃
Steam pressure: 0.8-1.3mpa
Air source pressure: 0.6-0.9mpa
Cooling setting length: 4-8M
Number of heating plates: 9-18 pieces
Hydraulic system pressure: 6-8mpa
Roller diameter parameters
The diameter of upper driving cot: ￠ 475mm
The diameter of the lower driving cot: ￠ 350mm
The diameter of front driven belt roller: ￠ 176mm
Diameter of driven roller after setting￠ 176mm
The diameter of pressing roller: ￠ 70mm
The diameter of shaping idler: ￠ 86mm
The diameter of upper belt tensioning roll: ￠ 155mm
The diameter of upper belt deflection adjusting roll: ￠ 124mm
The diameter of lower belt roller: ￠ 130mm
Note: the surface of all rollers is hard chromium plated after grinding.
Product detail pictures:
Related Product Guide:
Our organization insists all along the quality policy of "product quality is base of business survival; purchaser gratification is the staring point and ending of an business; persistent improvement is eternal pursuit of staff" as well as the consistent purpose of "reputation 1st, purchaser first" for Manufactur standard Pre-Fold Folder Gluer - SM-E type double facer – HengChuangLi , The product will supply to all over the world, such as: Ottawa , Mexico , San Diego , Our expert engineering team will generally be prepared to serve you for consultation and feedback. We are able to also offer you with free of charge samples to meet your requirements. Best efforts will likely be produced to provide you the best service and merchandise. When you are keen on our business and products, please speak to us by sending us emails or call us quickly. In an effort to know our products and company extra, you may come to our factory to view it. We will generally welcome guests from all over the world to our business to create business relations with us. Please feel cost-free to speak to us for small business and we believe we'll share the best trading experience with all our merchants.
By Ida
from Thailand
- 2017.05.02 18:28
We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
By Mag
from Netherlands
- 2017.09.28 18:29
Products categories
-
Online Exporter Lead Edge Printing Machine For ...
-
18 Years Factory Corrugated Box Making Machine ...
-
Reasonable price for Carton Flute Laminator - ...
-
Professional China Carton Equipment - LJXC-Aut...
-
OEM Supply Fingerless Single Facer Machine - C...
-
Lowest Price for Small Box Folder Gluer Machine...