Welcome to our websites!
Products
-
Quality Inspection for Printer Slotter Die-Cutter Folder Gluer Inline - Electric bracket – HengChuangLi
Structural features The symmetrical structure can be installed with two bundles of paper cylinders at the same time, which can be used for paper changing without stopping the machine; the mechanical drive is used to complete the clamping, lifting, loosening, moving, centering, left and right translation of the base paper. Manual disc brake, with limit screw and tooth type chuck under it. The main frame is 14 channel steel and ￠ 20 mm cold drawn round steel, and the length of ground rail is 6... -
-
Hot New Products Waste Cleaning And Stacking Machine - Cassette Single Facer SF-360E(320E) – HengChuangLi
Structural features Design speed: 150m / min Effective width: 1800-2500mm The main corrugating roller: ￠ 320mm (different according to different types), pressure roller ￠ 370mm, preheating roll ￠ 400mm The negative pressure design with low heat loss makes the core paper uniformly pressed and attached to the surface of the corrugating roller, so that the corrugated can be better formed. Because the pressure is uniform, the top of the corrugated can be better coated with glue, so that the si... -
-
-
-
Manufactur standard Pre-Fold Folder Gluer - Double glue machine – HengChuangLi
Structural features After the surface of the cot is quenched and tempered, the inner hole is processed, and the dynamic balance is done. The surface is finely ground and engraved with pit pattern. The coating is uniform and the glue consumption is small. The rotation of the cots is controlled by the variable frequency motor and frequency conversion, and the frequency control ensures that the linear speed of the cots is synchronized with the two sides, and it can operate independently. Coating... -
-
-
-
-
100% Original Factory Ink Press - SM-E type double facer – HengChuangLi
Structural features The surface of the heating plate is grinded, and the width of the hot plate is 600mm. The heating plate is made of container plate, which conforms to the national class I pressure vessel standard, and the pressure vessel certificate and inspection certificate are attached. The hot plate adopts dense gravity roller structure. The pressure roller adopts pneumatic lifting. The heat conduction piping of the heating plate is divided into four sections to control the temperature...