Chinese wholesale Channel Steel Of Waste Cleaning And Stacking Machine - SM-E type double facer – HengChuangLi
Chinese wholesale Channel Steel Of Waste Cleaning And Stacking Machine - SM-E type double facer – HengChuangLi Detail:
Structural features
The surface of the heating plate is grinded, and the width of the hot plate is 600mm. The heating plate is made of container plate, which conforms to the national class I pressure vessel standard, and the pressure vessel certificate and inspection certificate are attached.
The hot plate adopts dense gravity roller structure. The pressure roller adopts pneumatic lifting.
The heat conduction piping of the heating plate is divided into four sections to control the temperature, with temperature display.
The double cylinder S-type tension device is adopted for the upper cotton belt.
The lower belt adopts S-shaped manual deviation correction and tension mechanism, with simple and practical structure, and a set of manual fine-tuning type of lower belt.
The driving roller surface is coated with wear-resistant image glue, which is herringbone structure with medium height to ensure smooth output of paperboard.
The main drive motor is frequency conversion speed regulating motor, with large low-speed torque, wide speed range, reliable use and simple maintenance.
The internal part of the hot plate is a diaphragm isolation structure, which makes the steam flow in S-shape. The separation function of steam and water is obvious, and the utilization rate of steam is improved.
Technical parameters
Temperature requirement: 160-200 ℃
Steam pressure: 0.8-1.3mpa
Air source pressure: 0.6-0.9mpa
Cooling setting length: 4-8M
Number of heating plates: 9-18 pieces
Hydraulic system pressure: 6-8mpa
Roller diameter parameters
The diameter of upper driving cot: ￠ 475mm
The diameter of the lower driving cot: ￠ 350mm
The diameter of front driven belt roller: ￠ 176mm
Diameter of driven roller after setting￠ 176mm
The diameter of pressing roller: ￠ 70mm
The diameter of shaping idler: ￠ 86mm
The diameter of upper belt tensioning roll: ￠ 155mm
The diameter of upper belt deflection adjusting roll: ￠ 124mm
The diameter of lower belt roller: ￠ 130mm
Note: the surface of all rollers is hard chromium plated after grinding.
Product detail pictures:
Related Product Guide:
While using the "Client-Oriented" organization philosophy, a rigorous top quality command process, highly developed production devices and a potent R&D workforce, we normally provide high quality products, outstanding solutions and aggressive charges for Chinese wholesale Channel Steel Of Waste Cleaning And Stacking Machine - SM-E type double facer – HengChuangLi , The product will supply to all over the world, such as: UAE , Sweden , United Kingdom , For many years, we have adhered to the principle of customer oriented, quality based, excellence pursuing, mutual benefit sharing. We hope, with great sincerity and good will, to have the honor to help with your further market.
By Elva
from Buenos Aires
- 2018.09.23 17:37
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Elma
from Houston
- 2018.02.04 14:13
Products categories
-
Hot-selling Flexo Printer Folder Gluer - Autom...
-
Top Suppliers Carton Flexo Printing Machine - ...
-
Discount Price Printer Gluer - 280 single mach...
-
2021 wholesale price Printing Slotting Machine ...
-
One of Hottest for Carton Box Sheet Laminator -...
-
Leading Manufacturer for Carton Printing Slotti...