China Factory for Box Gluer Machine - SM-E type double facer – HengChuangLi
China Factory for Box Gluer Machine - SM-E type double facer – HengChuangLi Detail:
Structural features
The surface of the heating plate is grinded, and the width of the hot plate is 600mm. The heating plate is made of container plate, which conforms to the national class I pressure vessel standard, and the pressure vessel certificate and inspection certificate are attached.
The hot plate adopts dense gravity roller structure. The pressure roller adopts pneumatic lifting.
The heat conduction piping of the heating plate is divided into four sections to control the temperature, with temperature display.
The double cylinder S-type tension device is adopted for the upper cotton belt.
The lower belt adopts S-shaped manual deviation correction and tension mechanism, with simple and practical structure, and a set of manual fine-tuning type of lower belt.
The driving roller surface is coated with wear-resistant image glue, which is herringbone structure with medium height to ensure smooth output of paperboard.
The main drive motor is frequency conversion speed regulating motor, with large low-speed torque, wide speed range, reliable use and simple maintenance.
The internal part of the hot plate is a diaphragm isolation structure, which makes the steam flow in S-shape. The separation function of steam and water is obvious, and the utilization rate of steam is improved.
Technical parameters
Temperature requirement: 160-200 ℃
Steam pressure: 0.8-1.3mpa
Air source pressure: 0.6-0.9mpa
Cooling setting length: 4-8M
Number of heating plates: 9-18 pieces
Hydraulic system pressure: 6-8mpa
Roller diameter parameters
The diameter of upper driving cot: ￠ 475mm
The diameter of the lower driving cot: ￠ 350mm
The diameter of front driven belt roller: ￠ 176mm
Diameter of driven roller after setting￠ 176mm
The diameter of pressing roller: ￠ 70mm
The diameter of shaping idler: ￠ 86mm
The diameter of upper belt tensioning roll: ￠ 155mm
The diameter of upper belt deflection adjusting roll: ￠ 124mm
The diameter of lower belt roller: ￠ 130mm
Note: the surface of all rollers is hard chromium plated after grinding.
Product detail pictures:
Related Product Guide:
Assume full accountability to satisfy all demands of our consumers; reach ongoing advancements by endorsing the expansion of our purchasers; come to be the final permanent cooperative partner of clients and maximize the interests of clientele for China Factory for Box Gluer Machine - SM-E type double facer – HengChuangLi , The product will supply to all over the world, such as: Provence , Nicaragua , UK , We will not only continuously introduce technical guidance of experts from both home and abroad, but also develop the new and advanced products constantly to satisfactorily meet the needs of our clients all over the world.
By Cornelia
from Luxemburg
- 2018.11.04 10:32
It can be said that this is a best producer we encountered in China in this industry, we feel lucky to work with so excellent manufacturer.
By Rosemary
from Israel
- 2018.02.12 14:52
Products categories
-
Factory wholesale Corrugated Cardboard Machine ...
-
China wholesale Single Side Corrugating Machine...
-
2021 High quality Cardboard Fully Automatic Flu...
-
Factory Free sample Automatic Carton Folder Glu...
-
China New Product Color Lead Edge Printer Slott...
-
Hot New Products Waste Cleaning And Stacking Ma...