2021 Latest Design Folder Gluer Machine For Side Gluing - SM-E type double facer – HengChuangLi

Short Description:

Product Detail

Product Tags

Feedback (2)

To be the stage of realizing dreams of our employees! To build a happier, more united and more professional team! To reach a mutual benefit of our customers, suppliers, the society and ourselves for Folder Gluer Machine With Higher Liner Speed , Automatic Flexo Folder Gluer , Single Facer , We sincerely welcome overseas buyers to consult for that long-term cooperation as well as the mutual progress.

2021 Latest Design Folder Gluer Machine For Side Gluing - SM-E type double facer – HengChuangLi Detail:

Structural features

The surface of the heating plate is grinded, and the width of the hot plate is 600mm. The heating plate is made of container plate, which conforms to the national class I pressure vessel standard, and the pressure vessel certificate and inspection certificate are attached.

The hot plate adopts dense gravity roller structure. The pressure roller adopts pneumatic lifting.

The heat conduction piping of the heating plate is divided into four sections to control the temperature, with temperature display.

The double cylinder S-type tension device is adopted for the upper cotton belt.

The lower belt adopts S-shaped manual deviation correction and tension mechanism, with simple and practical structure, and a set of manual fine-tuning type of lower belt.

The driving roller surface is coated with wear-resistant image glue, which is herringbone structure with medium height to ensure smooth output of paperboard.

The main drive motor is frequency conversion speed regulating motor, with large low-speed torque, wide speed range, reliable use and simple maintenance.

The internal part of the hot plate is a diaphragm isolation structure, which makes the steam flow in S-shape. The separation function of steam and water is obvious, and the utilization rate of steam is improved.

Technical parameters

Temperature requirement: 160-200 ℃

Steam pressure: 0.8-1.3mpa

Air source pressure: 0.6-0.9mpa

Cooling setting length: 4-8M

Number of heating plates: 9-18 pieces

Hydraulic system pressure: 6-8mpa

Roller diameter parameters

The diameter of upper driving cot: ￠ 475mm

The diameter of the lower driving cot: ￠ 350mm

The diameter of front driven belt roller: ￠ 176mm

Diameter of driven roller after setting￠ 176mm

The diameter of pressing roller: ￠ 70mm

The diameter of shaping idler: ￠ 86mm

The diameter of upper belt tensioning roll: ￠ 155mm

The diameter of upper belt deflection adjusting roll: ￠ 124mm

The diameter of lower belt roller: ￠ 130mm

Note: the surface of all rollers is hard chromium plated after grinding.

Product detail pictures:

Related Product Guide:

With reliable good quality system, great standing and perfect consumer support, the series of products and solutions produced by our organization are exported to quite a few countries and regions for 2021 Latest Design Folder Gluer Machine For Side Gluing - SM-E type double facer – HengChuangLi , The product will supply to all over the world, such as: Afghanistan , French , Thailand , With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we are trying our best to be your good partner.

2800 Automatic Box Gluing Machine